Flow Meter Models

Download The Brochure

BROCHURE/Products/Models Print this page[PDF]

This diagram depicts the various styles and base models currently offered by Sage Metering, Inc. including General Purpose, Explosion Proof and Remote Configurations.

⁽¹⁾“Lite” refers to “Sage Lite” Product Line for OEM customers (consisting of blind enclosures) or optionally offered as a single round circuit board only. Also available upon request with explosion proof enclosures.

⁽²⁾ Remote General Purpose style has an Explosion Proof Junction Box (with no electronics) as well as the General Purpose (NEMA 4X) Remote Fiberglass Enclosure.

⁽³⁾ Available in any style, although Integral Insertion is shown.

INTEGRAL GENERAL PURPOSE		⁽²⁾ REMOTE GENERAL PURPOSE
IN-LINE	INSERTION	IN-LINE	INSERTION

SIG-XXX	SIG-XX-XX	SRG-XXX	SRG-XX-XX

INTEGRAL EXPLOSION PROOF		REMOTE EXPLOSION PROOF
IN-LINE	INSERTION	IN-LINE	INSERTION

SIE-XXX	SIE-XX-XX	SRE-XXX	SRE-XX-XX

⁽¹⁾INTEGRAL LITE GENERAL PURPOSE		⁽¹⁾REMOTE LITE GENERAL PURPOSE		⁽³⁾OPTIONAL EXPLOSION PROOF
IN-LINE	INSERTION	IN-LINE	INSERTION	INLINE OR INSERTION

SIL-XXX	SIL-XX-XX	SRL-XXX	SRL-XX-XX	SIL or SRL

This model number describes a Sage Integral Style General Purpose Insertion Mass Flow Meter for Natural Gas with a Sage Isolation Valve Assembly, 1/2" x 15" long probe, and 115VAC power

Your Pipe Size	Sage In-Line Meters	Sage Insertion Meters
1/4"	S( _ _ )-025	N/A
3/8"	S( _ _ )-030	N/A
1/2"	S( _ _ )-050	N/A
3/4"	S( _ _ )-075	N/A
1"	S( _ _ )-100	N/A
1-1/4"	S( _ _ )-125	N/A
1-1/2"	S( _ _ )-150	S( _ _ )-05-12
2"	S( _ _ )-200	S( _ _ )-05-15
2-1/2"	S( _ _ )-250	S( _ _ )-05-15
3"	S( _ _ )-300	S( _ _ )-05-15
4"	S( _ _ )-400	S( _ _ )-05-15
6"-12"	N/A	S( _ _ )-05-15
14"-24"	N/A	S( _ _ )-05-18
26"-36"	N/A	S( _ _ )-05-24
>36"	N/A	Consult Factory

Building a Model Number
1.	Select Style
	•	Integral (I) or Remote (R)
	•	General Purpose (G), Explosion Proof (E), or Sage Lite (L)
	•	In-Line (-XXX) or Insertion (-XX-XX)
2.	If In-Line, select pipe size (see table on page 4 for Flow Body Length)
3.	If Insertion, select probe diameter, and length
	•	[(-05 = 1/2" tube (standard); -07 = 3/4" tube (optional)]
4.	Select probe length based on mounting hardware choice (the chart assumes utilizing Sage Isolation Valve Assembly mounting hardware)
	•	-12 = 12" length; -15 = 15" length
	•	-18 = 18" length; -24 = 24" length
	•	-06 = 6" length (assumes utilizing Sage Teflon Compression Fitting mounting hardware)
5.	If Insertion, select mounting hardware (Valve or Compression Fitting)

	•	SVA05 = Sage Valve assembly for 1/2" probe
	•	SVA07 = Sage Isolation Valve Assembly for optional 3/4" probe
	•	STCF05 = Sage Teflon Compression Fitting for 1/2" probe
	•	SSCF05 = Sage Stainless Steel Compression Fitting for 1/2" probe
	•	STCF07 = Sage Teflon Compression Fitting for optional 3/4" probe
6.	Select operating voltage: -DC24 = 24VDC; -AC115 = 115VAC; -AC230 = 230VAC
7.	Add symbol of gas being measured at end of part number
8.	Add Options (such as RG2: Dual Range; RELAY: Two Dry Contact, Menu Configurable Relays; OPC: Oxygen Pre-Clean)
9.	Include Full Scale Flow Rate and operating temperature and pressure in description

To get started on your application, or contact us use the button below on any page.