 |
 |
SIG
SERIES INTEGRAL GENERAL PURPOSE MASS FLOW METER
In-Line Style 1,8,9
NEMA 4X Enclosure. 150# or 300# flanged ends are optionally
available. (1" Flow Body Shown) |
|
IN-LINE
METER DIMENSIONS(5)
Flow Body Length Shown on Page 4
|
|
Pipe
Size
|
Gen.
Purpose (A)
|
Expl.
Proof (B)
|
|
3/8"
|
8.09"
|
7.39"
|
|
1/2"
|
8.15"
|
7.45"
|
|
3/4"
|
8.28"
|
7.58"
|
|
1"
|
8.40"
|
7.70"
|
|
1-1/4"
|
8.53"
|
7.83"
|
1-1/2" |
8.65" |
7.95" |
2" |
8.90" |
8.20" |
2-1/2" |
9.15" |
8.45" |
3" |
9.40" |
8.70" |
4" |
9.90" |
9.20" |
|
|
SIE
SERIES INTEGRAL EXPLOSION PROOF12 MASS
FLOW METER
Insertion Style2,7
Explosion Proof Enclosure (Cast
Aluminum). Class I, Division I, Group B, C, D. 150#
or 300# flanged mounting is optionally available. Available
probe lengths (C) are 6", 12", 15",
18", 24", 30", 36" or 48".
|
|
SRE
SERIES REMOTE STYLE EXPLOSION PROOF12 MASS
FLOW METER
In-Line Style1,7
(Also available as Insertion Style)
Explosion Proof Enclosure (Cast Aluminum).
Class I, Division I, Group B, C, D. 150# or 300#
flanged ends are optionally available.
(1" Flow Body shown)
(Optional Mounting Brackets available) |
 |
SVA
SERIES VALVE ASSEMBLY MOUNTING HARDWARE FOR INSERTION
METERS13
The Isolation Valve Assembly permits insertion
or removal of probe withut shutting down the
gas line. |
 |
STCF
SERIES TEFLON FERRULE COMPRESSION FITTING MOUNTING HARDWARE
1/2" tube x 1/2" pipe fitting (shown,
not to
scale), is used for low pressure insertion applications
to 125 psig (Stainless Steel Ferrule
optional for higher pressure applications –
up to 225 psig). Also available in 3/4" tube x
3/4" pipe size. |
|
 |
SIG
SERIES INTEGRAL GENERAL PURPOSE MASS FLOW METER
Insertion Style2,8,9
NEMA 4X Enclosure. 150# or 300# flanged mounting is optionally
available. Available probe lengths (C) are 6", 12", 15", 18",
24", 30", 36" or 48". |
 |
SRG
SERIES REMOTE GENERAL PURPOSE MASS FLOW METER
Insertion Style2,8,9
(Also
available as In-Line Style)
NEMA 4X Enclosure (Fiberglass14). 150# or 300#
flanged mounting is optionally available.
Available
probe lengths (C) are 6", 12", 15",
18", 24", 30", 36" or 48". |
 |
SRL
SERIES REMOTE LITE (BLIND) MASS FLOW METER
Insertion Style2,8,9,10
(Also available as In-Line Style)
NEMA 4X Enclosure (ABS Plastic). 150# or 300#
flanged mounting is optionally available.
Available
probe lengths (C) are 6", 12", 15",
18", 24", 30", 36" or 48". |
|
|
SIL
SERIES INTEGRAL EXPLOSION PROOF12
(BLIND) MASS FLOW METER
In-Line Style1,8
(Also available as Insertion Style)
Explosion Proof Enclosure (Cast Aluminum), Class I,
Division I, Group C, D. 150# or 300# flanged ends
are optionally available. (1" Flow Body shown) |
 |
SIE
SERIES INTEGRAL EXPLOSION PROOF12 MASS
FLOW METER
In-Line Style1,7
Class I, Division I, Group B, C,
D. 150# or 300# flanged ends are optionally available. (1" Flow
Body shown.) |
1
- NPT
Fittings standard (150# or 300# flanges optional)
2 - Flanged Mounting
available for high pressure operation
4 - 10" nominal when collar clamps
are together
5 - Safety chain is sized depending
on probe length to prevent probe from escaping above
compression fitting.
6 - At 650 psig, force exerted on 1⁄2
diameter probe is approx. 125 psig.
7 - 3/4" Female NPT access holes
for wiring (conduit compatible)
8 - Access holes are 1⁄2" NPT
(supplied capped)
9 - All NEMA 4X Enclosures have 4" depth
10 - Circuit board available separately,
3" diameter.
11 - When flanges specified, face-to-face
dimensions same as Length on Table on page 4.
12 - All Explosion Proof Meters are
Class I, Group B, C, D, Class II Group E, P, G and Class
IV and have Cenelec, EExd Enclosure IIC, IP66 ratings
and are NEMA 4X, 7BCD and 9EPG rated.
(All Junction Boxes, when applicable, are Class I, Group C & D; Class II, Group E, F, G, and NEMA 7 and NEMA 9 rated.)
13 - Used for pressures to 650 psig (shown for use with 1⁄2" x
3⁄4" NPT and 3⁄4" x 1" NPT.
14 - Other materials available |
|
Print this page[PDF]